Weighing Transmitter

Analog and Digital Industrial Weighing Transmitter Options

Our industrial weighing transmitter range includes built-in analog transmitters, built-in digital transmitters, external analog load cell signal conditioners, and digital load cell transmitters. Available configurations cover load cell signal conversion, PLC integration, digital sensor communication, and multi-channel weighing.

The four main options are:

  • Built-in Analog Transmitter: An integrated analog weighing transmitter with 4–20mA or 0–10V output options and a dual-output version supporting 4–20mA and RS485.
  • Built-in Digital Transmitter: An integrated digital weighing transmitter with Modbus RTU, CANopen, or IO-Link communication.
  • Weight Transmitter Load Cell: An external load cell signal conditioner with 35mm DIN rail mounting and optional RS485 communication.
  • Digital Load Cell Transmitter: A multi-channel digital load cell transmitter with eight-channel weighing signal processing, a 7-inch touchscreen, and multiple industrial communication outputs.
 
  • Built-in Analog Transmitter
    Capacity range: 10 kg to 10 tons
    Combined accuracy: 0.1% FS
    Output ripple: ≤5 mV
    Internal ADC: 24-bit
    Internal DAC: 16-bit
    read more
  • Weight Transmitter Load Cell
    Output accuracy: 0.05% FS
    Response time: <10 ms
    Input sensitivity: 1-3 mV/V
    Input impedance: ≥10 MΩ
    Housing: Die-cast aluminum, 22.5×100×115 mm
    read more
  • Built-in Digital Transmitter
    Capacity range: 10 kg to 20 tons
    Output data rate: 10-200 Hz, adjustable
    Resolution: 24-bit
    Effective internal count: ±100,000
    Internal processing: Temperature...
    read more
  • Digital Load Cell Transmitter
    Input options: mV analog (±39mV) or RS485 digital
    Output accuracy: 0.05% FS
    Display: 7-inch touchscreen (shows each channel and total)
    Enclosure: Aluminum alloy, IP40 (front),...
    read more
  • Force Indicator and Controller
    Sampling speed: 1000 times/second
    Display resolution: 1/100,000
    Units: N, kg, lb (switchable)
    Comparator: Built-in, settable high/low limits, relay output for alarm or stop...
    read more
  • Platform Scale Indicator
    Sensor excitation: 5V, drives up to 8 sensors (350Ω each)
    Resolution: 24-bit
    Sampling rate: 10-80 times/second
    Operating temperature: -10℃ to +40℃
    Power supply: 220 VAC...
    read more
  • Weight Scale Controller
    Capacity range: 0 – 100 tons
    Control accuracy: 0.2% FS
    Sampling speed: 200 times/second
    Enclosure: Metal, DIN rail or panel mount
    Display: 7-inch touchscreen, 800×480...
    read more
  • Explosion-Proof Weighing Indicator
    Ex mark: Ex db IIB T6 Gb
    Certifications: ATEX, IECEx, CCC Ex
    Enclosure: Cast aluminum, wall thickness ≥6mm
    Explosion test: Withstands 1.5MPa internal explosion...
    read more
  • Wireless Weighing Indicator
    Max transmission distance: 500 meters (line of sight), through 2 concrete walls
    Indicator battery: Built-in rechargeable lithium, 72 hours continuous
    Enclosure: ABS + TPE two-color...
    read more
  • Large Display Weight Indicator
    Protection class: IP65, for all-weather outdoor use
    LED type: Imported chips, red or bright green optional
    Brightness: ≥5000 mcd
    Digit heights: 4 inch, 6 inch, 8 inch, 12...
    read more
 

Sensor Input and Output Compatibility

The input and output configuration determines how a weighing transmitter connects to load cells and industrial control equipment.

Product Input / Sensor Compatibility Output / Communication
Built-in Analog Transmitter Integrated with the weighing sensor 4–20mA, 0–10V, or dual 4–20mA + RS485
Weight Transmitter Load Cell Strain gauge sensors, 1–3 mV/V Analog signal conditioning; optional RS485 Modbus RTU
Built-in Digital Transmitter Integrated digital weighing sensor Pre-calibrated weight in kg, lb, or N; Modbus RTU (RS485), CANopen, or IO-Link
Digital Load Cell Transmitter mV analog (±39mV) or RS485 digital Modbus TCP, Profinet, EtherNet/IP, 4–20mA, 0–10V, and relay contacts

The external analog load cell signal conditioner has an input impedance of ≥10 MΩ and supports 5V or 10V sensor excitation. It can drive up to four 350Ω sensors.

The digital load cell transmitter supports eight channels, displaying individual channel readings and total weight on its touchscreen.

Accuracy, Capacity and Response

The following specifications distinguish the four industrial weighing transmitter configurations.

Parameter Built-in Analog External Analog Built-in Digital Digital Load Cell
Capacity range 10 kg–10 tons — 10 kg–20 tons —
Accuracy 0.1% FS combined accuracy 0.05% FS output accuracy — 0.05% FS output accuracy
Response time — <10 ms — —
Resolution 24-bit ADC, 16-bit DAC — 24-bit —
Data rate — — 10–200 Hz adjustable —
Effective internal count — — ±100,000 —

A dash indicates that the specification is not stated for that product on the current product page.

Installation and Electrical Specifications

Parameter Built-in Analog External Analog Built-in Digital Digital Load Cell
Supply voltage 12–30 VDC 12–30 VDC Not specified 24 VDC
Power consumption Not specified ≤2 W Not specified ≤5 W
Protection IP66 Short-circuit and overload protection IP68 IP40 front
Operating temperature -10℃ to +50℃ -20℃ to +70℃ Not specified Not specified
Mounting Integrated into sensor 35mm DIN rail Integrated into sensor Panel or DIN rail
Housing / Elastic body Aluminum alloy or stainless steel Die-cast aluminum Stainless steel Aluminum alloy

The external DIN rail weight transmitter measures 22.5 × 100 × 115 mm and uses removable pluggable terminals. Its excitation options are 5V or 10V, supporting up to four 350Ω sensors.

The built-in analog transmitter uses a 3m, 4-core shielded cable, with two cores for power and two for signal.

Configuration and Calibration Options

Available configurations depend on the selected transmitter model.

  • Analog output: 4–20mA two-wire or 0–10V three-wire output. A dual-output version provides 4–20mA and RS485.
  • Signal filtering: The external analog transmitter provides DIP-switch selection of 10Hz, 50Hz, 100Hz, or 200Hz filter cutoff frequencies.
  • Communication: Digital versions support Modbus RTU, CANopen, or IO-Link. The digital load cell transmitter also offers Modbus TCP, Profinet, EtherNet/IP, analog outputs, and relay contacts.
  • Calibration: The built-in analog transmitter supports digital zero and full-scale calibration through a setup button or handheld programmer. Physical calibration using standard test weights is also available.
  • Sensor replacement: The built-in digital transmitter supports address-based replacement without recalibration when the replacement sensor has the same capacity and sensitivity as the original.
  • Multi-channel adjustment: The digital load cell transmitter supports automatic corner correction using test weights applied to individual corners.
  • Additional configuration: The external analog transmitter offers an optional Ex ia version and optional RS485 Modbus RTU interface. The specific explosion-protection documentation should be confirmed for the selected version.

Manufacturing and Technical Support

Yixing Silvanus Electric Manufacture Co., Ltd. was established in 2007 and operates two production workshops. Its business covers the research, development, and manufacture of weighing sensors, intelligent electronic weighing instruments, overload limiters, and computer-based weighing control systems.

Our technical support includes weighing system solution design, product selection consultation, and technical parameter customization. Installation guidance, system debugging, and operation training are also available.

The company's stated after-sales policy includes a one-year free warranty for products sold, subject to the conditions specified in the product manual.

Request a Quotation

Send us your load cell specifications, required signal output or communication protocol, installation requirements, and estimated order quantity. We can review the available weighing transmitter configurations and provide a product recommendation and quotation based on your application.

Discuss your weighing transmitter requirements.

Send your technical specifications and order quantity to:

jacky@silvanus.cn

With abundant experience, we are one of the most professional weighing transmitter manufacturers and suppliers in China. We warmly welcome you to buy bulk advanced weighing transmitter in stock here and get pricelist from our factory. All customized products are with high quality and competitive price.

force tester with data logging, PLC compatible load cell, weighing transmitter