Load Cell Mounting Kit
Load Cell Mounting Kits for Industrial Weighing Systems
Our load cell mounting kits cover standard weighing modules, integrated mounting assemblies, and specialized solutions for explosion-proof, high-temperature, and corrosive environments. Available capacity ranges extend from 10 kg to 200 tons across different product series, with C3 accuracy class specified for all five listed series.
-
Weigh Module with Mounting KitCapacity range: 100 kg to 100 tonsread more
Accuracy class: C3
Material options: Carbon steel zinc plated, or stainless steel
Each module includes: Sensor, top plate (with locating... -
Load Cell Mounting AssemblyCapacity range: 10 kg to 50 tonsread more
Accuracy class: C3
Assembly environment: Clean room
Fastener torque: Precision torque wrench to standard values
Cable connection:... -
Explosion-Proof Weighing ModuleCapacity range: 100 kg to 100 tonsread more
Accuracy class: C3
Sensor protection: Intrinsically safe, energy-limited, surface temp ≤85℃
Module housing: 316L stainless steel... -
High-Temperature Weighing ModuleCapacity range: 1 ton to 200 tonsread more
Accuracy class: C3
Core sensor material: Inconel 718 high-temperature alloy
First heat shield: Stainless steel reflective plate (reflects 80%... -
Corrosion-Resistant Weighing ModuleCapacity range: 100 kg to 50 tonsread more
Accuracy class: C3
Protection class: IP68
All metal parts: 316L stainless steel (sensor, top/bottom plates, bolts, junction box)...
Weighing Modules for Different Capacity Requirements
Select a mounting solution according to the required weighing capacity and equipment configuration.
| Product Series | Capacity Range | Accuracy Class |
|---|---|---|
| Weigh Module with Mounting Kit | 100 kg–100 tons | C3 |
| Load Cell Mounting Assembly | 10 kg–50 tons | C3 |
| Explosion-Proof Weighing Module | 100 kg–100 tons | C3 |
| High-Temperature Weighing Module | 1 ton–200 tons | C3 |
| Corrosion-Resistant Weighing Module | 100 kg–50 tons | C3 |
The product range supports tank weighing modules and other industrial equipment projects requiring different load capacities, mounting arrangements, and operating conditions.
Mounting Structure and Configuration
The Weigh Module with Mounting Kit is available with carbon steel zinc-plated or stainless steel construction.
Each module includes:
- Load cell sensor
- Top plate with locating pin
- Bottom plate
- Anti-tilt bolt
- Rubber anti-slip pad
An optional tie rod is also available.
The top plate features a spherical self-aligning rocker column. Three-point or four-point support configurations are available according to the equipment structure. A stainless steel junction box can combine signals from up to eight modules. A digital junction box version is also available, with individual digital signal output from each module.
Special Operating Environment Options
Explosion-Proof Weighing Module
- Capacity range: 100 kg–100 tons
- Accuracy class: C3
- Sensor protection: Intrinsically safe, energy-limited
- Surface temperature: ≤85℃
- Module housing: 316L stainless steel
- Flameproof gap: ≤0.15 mm
- Junction box wall thickness: ≥6 mm
- Cable entry: Explosion-proof cable gland or sealing compound
- Grounding: Anti-static grounding wire
- Listed certifications: ATEX, IECEx, CCC Ex
High-Temperature Weighing Module
- Capacity range: 1 ton–200 tons
- Accuracy class: C3
- Core sensor material: Inconel 718 high-temperature alloy
- First heat shield: Stainless steel reflective plate, reflecting 80% of heat
- Second heat shield: Aerogel nano insulation felt, thermal conductivity 0.02 W/m·K
- Third heat shield: Water cooling plate
- Cooling water flow: 2–5 L/min
- Water temperature difference: ≤10℃ between inlet and outlet
The module incorporates a PT100 temperature sensor. Above 80℃, a solenoid valve automatically increases cooling water flow. At 100℃, an audible and visual alarm is activated.
A version without water cooling is also available, with a maximum ambient temperature of 250℃.
Corrosion-Resistant Weighing Module
- Capacity range: 100 kg–50 tons
- Accuracy class: C3
- Protection class: IP68
- Metal components: 316L stainless steel, including the sensor, top and bottom plates, bolts, and junction box
- Surface finish: Electropolished, Ra ≤0.8 μm
- Strain cavity seal: Laser welded and fully sealed
- O-ring: Fluororubber
- Cable sheath: PTFE, -60℃ to +200℃
- Salt spray test: 48 hours, 5% NaCl at 35℃
These configurations provide distinct material, protection, and temperature options for projects with specialized operating requirements.
Integrated Assembly and Signal Options
The Load Cell Mounting Assembly provides an integrated weighing assembly for projects requiring a pre-assembled weighing component.
Its listed configuration includes the sensor, mounting base, pressure head, cable, aviation plug, and transmitter. The components are pre-assembled and pre-calibrated.
Assembly specifications include:
- Capacity range: 10 kg–50 tons
- Accuracy class: C3
- Assembly environment: Clean room
- Fastener tightening: Precision torque wrench to standard values
- Cable connection: One-piece molded or metal armored
- Cable pull strength: ≥200 N
Built-in transmitter options include:
| Output Type | Available Options |
|---|---|
| Analog | 4–20 mA, 0–10 V |
| Digital | RS485, Modbus, CANopen |
The assembly can also be supplied as a customized load cell mounting assembly, with shape and mounting hole pattern adjusted to match existing equipment interfaces.
Engineering Customization and Supply Support
Yixing Silvanus Electric Manufacture Co., Ltd. provides weighing system solution design, product selection consultation, and technical parameter customization.
The company's service scope also includes installation guidance, system debugging, and operation training.
Established in 2007, the company operates two production workshops and has production, inspection, and laboratory equipment for weighing product development and manufacturing. Its product range includes load cells, intelligent weighing instruments, overload limiters, and weighing systems.
Request a Load Cell Mounting Kit Quote
Send us your required capacity, operating environment, preferred mounting configuration, and purchase quantity.
For replacement or equipment integration projects, include an installation drawing, existing mounting hole dimensions, or product photographs. Our team can review the available mounting kit options and discuss the appropriate configuration for your weighing system.
Request a QuoteWith abundant experience, we are one of the most professional load cell mounting kit manufacturers and suppliers in China. We warmly welcome you to buy bulk advanced load cell mounting kit in stock here and get pricelist from our factory. All customized products are with high quality and competitive price.
furnace weighing system, high temp silo weighing kit, pre wired load cell set